Spatial Motion of a Rod in a Viscous Fluid Flow

Equations of spatial motion of a curved finitelength rod in a viscous fluid flow are derived. Analytical solutions of problems on the motion of a straight rod under conditions of pure shear, simple shear, and uniaxial extension of the fluid are obtained. Longitudinal stability of the straight rod during its spatial motion is considered. Effective viscosity of a suspension filled by rigid straight rods is evaluated.     

瞬态加速液柱的流体力学问题研究

介绍了用激波和压缩气体加速液柱时的流体动力现象的实验研究,实验中采用了高速摄影技术。研究分为两部分:第一部分,液柱在被加速后在管内的气/液两相流的发展以及流出管外后喷雾流的形成,喷雾流自下而上产生;第二部分,气/液界面上的流体力学不稳定性,即Rayleigh Taylor(RT)不稳定性及Richt myer Meshkov(RM)不稳定性,液柱自上而下运动。实验发现,用此方法产生的喷雾具有流量大、射程远、覆盖面积大等特点。液柱在管内的加速过程中,上端面保持平面,下端面在经历了初始的不稳定性之后形成弹状流。在本实验的驱动压力及马赫数的范围内,RT和RM不稳定性的后期的发展过程比较接近,尽管两者的增长率不同。在RT不稳定性的初始阶段,高密度流体的尖钉先伸入低密度流体中;但是,在RM不稳定性的初始阶段,低密度的气泡先伸入高密度流体中。     

斜面结构冰荷载的动荷效应

利用改进的刚性梁模型进行了斜面结构冰荷载的动荷效应，推导了冰力的动荷系统，算例得到了与模型试验值和数值解相近的结果，依据分析对试验观察到的规律给出了理论上的证明和定性的解释，给出了准静态冰力条件的判别式。     

考虑地基-结构-散粒体相互作用时贮仓结构的静、动力研究[Ⅱ]--有限元分析

对贮仓结构的静、动力问题进行了系统的分析计算：考虑到地基—结构—散粒体间的相互作用，引入新的计算模式，对不同地基上的贮仓结构模型进行了系统的有限元静、动力分析计算，并与作者所完成的试验结果进行了比较。结果表明，所提出的计算模式及有限元计算模型是正确的。     

复杂边界条件下渗流场流线分布研究

流线分布研究已受到油藏工程师们的普遍关注。本文从无限大油藏稳态渗流场基本解出发,结合边界元方法求解出复杂边界条件下稳态渗流场的势分布,以此为基础提出了流线场的生成办法,并给出了应用实例。本文方法的优点在于求解过程中将问题的维数降低了一维,减少了计算量;计算精度较高且具有一定的普遍应用性;适应于求解任意形状的包括定压、定流量或混合边界在内的组合边界问题。实例表明,利用本文方法产生的流线分布因能够较为直观地反映出油藏流体在注采井间的运动轨迹,为优化井网和注入方案提供了重要依据。     

后台阶流动的数值模拟

访述了大涡模拟的基本思想，指出大涡模拟的效率主要取决于四个因素，即流动中须有大尺度涡存在、合理的计算格式、合适的滤波器和亚格子应力模型。在深入考虑粘性不可压缩流Navier—Stokes方程各个子项作用的基础上，提出二阶全展开Euler—Taylor—Galerkin有限元方法作为大涡模拟的离散格式，并采用Gauss滤波器，对典型算例——后台阶处的流动进行大涡模拟，计算结果与相关文献符合的很好。从计算结果还可以看出大涡模拟与二阶全展开ETG有限元方法的结合在捕捉涡系及反映涡动时变过程方面具有明显的优势，说明大涡模拟适合于边界几何形状复杂区域流动的模拟。同时应用二阶全展开ETG有限元方法对低雷诺数粘性不可压缩后台阶流动进行了计算，得到与相关文献符合良好的计算结果，即该方法也可独立用于对低雷诺数粘性不可压缩流动的计算。     

界面特性对短纤维金属基复合材料蠕变行为的影响

基于短纤维增强金属基复合材料(MMC)的单纤维三维模型(三相)，利用粘弹性有限元分析方法对影响金属基复合材料的蠕变行为的因素进行了较为系统的分析。研究中主要讨论了界面特性和纤维取向角对金属基复合材料的蠕变性能的影响。研究结果发现，界面特性诸如厚度、模量和应力指数都对纤维最大轴应力和稳定蠕变率产生影响：稳态蠕变率随界面模量的增大而逐渐减小，当高于基体模量时基本保持不变；纤维轴应力的变化与蠕变率正好相反。稳态蠕变率随界面厚度、应力指数的增加而增大；而轴应力则随之减小。同时不同的纤维取向也影响金属基复合材料蠕变时的轴应力分布和稳态蠕变率。     

Calculation of Heavy Gas Spreading Over the Earth Surface by a Three-Dimensional Model

A mathematical model is constructed for motion of a heavy gas along the underlying terrain on the basis of equations of gas dynamics with allowance for the force of gravity, transfer by air masses, and turbulent diffusion. With the use of the method of coarse particles, the time dependences of the coordinates of the fore front, upper boundary, and volume of the cloud of a heavy gas in the presence and absence of wind are analyzed. It is shown that turbulent diffusion leads to a linear increase in cloud volume in time. Three-dimensional shapes of the heavy gas cloud are obtained for various ambient conditions. It is shown that, despite diffusion, the heavy gas spreads predominantly along the underlying terrain.     

Waves on the surface of a falling power-law fluid film

Waves that occur at the surface of a falling film of thin power-law fluid on a vertical plane are investigated. Using the method of integral relations an evolution equation is derived for two types of waves equation which are possible under long wave approximation. This equation reveals the presence of both kinematic and dynamic wave processes which may either act together or singularly dominate the wave field depending on the order of different parameters. It is shown that, at a small flow rate, kinematic waves dominate the flow field and the energy is acquired from the mean flow during the interaction of the waves, while, for high flow rate, inertial waves dominate and the energy comes from the kinematic waves. It is also found that this exchange of energy between kinematic and inertial waves strongly depends on the power-law index n. Linear stability analysis predicts the contribution of different terms in the wave mechanism. Further, it is found that the surface tension plays a double role: for a kinematic wave process, it exerts dissipative effects so that a finite amplitude case may be established, but for a dynamic wave process it yields dispersion. Further, it is shown that the non-Newtonian character n plays a vital role in controlling the role of the term that contains surface tension in the above processes.     

Un nouveau préconditionneur pour les problèmes elliptiques à coefficients variablesA new preconditonner for general elleptic problems

In this Note we describe a preconditionner for iteratively solving the linear system arising from the discretization of a general nonseparable elliptic problem by spectral element method. This preconditionner is constructed from approximating the original problem with the closest (in some sense) separable elliptic problem. A direct method is then used to invert the preconditionner. To cite this article: M. Azaïez et al., C. R. Mecanique 331 (2003).